WTQ-A Horizontal Automatic slitting machine

WTQ-A Horizontal Automatic slitting machine

Introduction:

This machine is suitable for PET, OPP, CPP, PE, PS, PVC and other single-layer plastic film, multi-layer plastic composite film, paper and other roll-shaped material slitter, especially suitable for large roll diameter paper slitter.

The performance characteristics：

1. Siemens PLC programmable control system, winding and unwinding tension by PLC automatic control.

2. Taiwan Weilun color touch screen man-machine interface, working state, speed, tension and other parameters centralized display and control.

3. The use of one-button start/stop design, tension switch, host start and stop are linkage control, start the machine only need to input the thickness of raw materials, diameter and speed and other simple parameters, the next work is all automatically calculated by the computer. PLC can realize winding meter, meter stop and automatic stop when the material is exhausted.

4. Host frequency control, Yaskawa frequency converter.

5. Horizontal structure, material receiving and feeding on both sides of the fuselage.

Cast iron body, ensure the stability of high speed operation.

7. Cutting part: equipped with two cutting methods: flat knife cutting and round knife cutting.

8. Unwinding air expansion shaft, the unwinding reel can be disassembled as a whole, or rotated on one side, automatic photoelectric deviation correction system is installed at the unwinding place.

9. Upper and lower double winding structure, both using air expansion shaft, and equipped with pressure roller. Retracting reel can be disassembled as a whole, or it can be rotated on one side for easy unloading. Pneumatic lock after retracting reel is put back.

10. Waste side guide pipe and high-power fan, blow out waste side from the right side of the machine.

11. All the guide rollers are made of highly hardened aluminum alloy and treated by static and static equilibrium.

Main Technical Parameter:

Note: can be customized according to customer requirements